aluminium soldering 是什么意思

aluminium soldering的中文意思是: 铝焊接

aluminium soldering例句大全

  1. The Design of Slitter of Soldering Aluminium Foil

    钎焊箔分切机组的设计

  2. The ultrasonic soldering process of aluminium heat exchangers and a few important factors effecting on

    论述了铝热交换器的超声波钎焊工艺及其影响钎焊的几个关键因素。

  3. then it part icularizes the requirements and the method of wave-soldering and the control method of temperature

    具体说明了波峰焊接机的要求及实现方法以及PLC对温度、波峰、助焊剂等的控制方法。

  4. It describes in detail the new applications of lithium in fields of glasses and ceramic industries , aluminium

    详细地叙述了锂在玻璃陶瓷工业、铌工业、真空焊接、润滑脂生产和电池工业等领域的新应用。

  5. Design stencil according to requirement of inserter soldering quality and reflow soldering technology

    根据插件焊接质量的要求,按照回流焊工艺设计印刷模板。

  6. The designers of Printed-circuit board usually make slots on the soldering plotes for mounting related

    印制电路板的设计者为了波峰焊和浸焊后安装元器件方便,常常在印制板的焊盘上开槽。

  7. The heatable tip of a soldering iron. soldering gun, whether or not electrically heated

    枪型烙铁,无论是否为电热式

  8. Currently, the two matured ways of welding are the wave soldering and dip soldering.

    目前应用较为成熟的焊接工艺主要有波峰焊接形式和和浸焊的形式。

  9. The soldering qualities of radiating fin are increased by adding Mg spalls in vacuo soldering furnace

    通过跟踪试验,在真空钎焊炉内加入镁屑,解决了质量问题,提高了散热片的钎焊成品率。

  10. Some soldering is not smooth.

    背面的多余锡焊没有剃平。

  11. Soldering tin Electroplating of copper wire

    铜线材电镀可焊性锡工艺

  12. Activated rosin flux for wave soldering

    松香型波峰焊用活性助焊剂

  13. Soldering wand in front of you!

    你前面有软焊棒!

  14. No welding , soldering or hard-soldering should be carried out on any part of the filled air -conditioning

    不要在加注后的空调系统的任何零件上进行焊接、锡焊和硬焊。

  15. Soldering iron whether or not electrically heated

    烙铁,无论是否为电热式

  16. A robotic system for electret microphone soldering

    用于焊接驻极体麦克风的锡焊机器人系统

  17. Design of Electromagnetic Wave Crest Soldering Machine

    电磁式波峰焊接机的设计

  18. Non-electric soldering iron of base metal

    烙铁,非电力的,贱金属制

  19. An Aluminum Soldering Technique for Microcircuit Packaging

    微电路封装中的铝钎焊技术

  20. The Study of Soldering Flux for Aluminum

    铝用软钎焊剂的研究

  21. Please follow"Reflow Soldering Conditions"in catalogue.

    请遵守产品目录中的回流焊条件。

  22. Tin-coat the plug-in contact before soldering.

    焊接之前必须给插入式触点涂上锡。

  23. Auto shift to tweezers or soldering iron function.

    自动切换电热镊子及烙铁双功能。

  24. Aluminium and aluminium alloy wire s for welding purpose

    GB/T3197-1982焊条用铝及铝合金线材

  25. Study and Preparation of RC-18A Type Soldering Flux

    RC&18A型助焊剂的研制

  26. Probe into the Soldering Methods for Cast Iron Part

    铸铁零件焊补方法的探讨

  27. By using waste soldering materials from electronic factories, the author succeeded in preparating a kind

    作者利用电子工厂失效焊料研制成含铜焊锡丝,该焊丝对铜烙铁头和微细铜丝有较小的熔蚀性。

  28. New contact closure systems do not require any soldering.

    新接点闭合系统无需任何焊接。

  29. Preparation and Study on Active Substance of Soldering Flux

    助焊剂活性物质的制备与研究

  30. Process and Mechanism of Ultrasonic Vibration assisted Soldering Glass

    超声波振动辅助钎焊玻璃工艺及机理研究

  31. Electrical communication engineering ; soldering distributors, requirements and test conditions.

    电讯技术。焊片端子板。要求和检验。

  32. The main produces: Solid-wooden window, Aluminium wraping wooden window, wood-aluminium compound window

    公司主打产品:实木窗、铝包木窗、木铝复合窗、铝塑铝窗和实木门等。产品有钢木、全钢、全木结构等实验室家具。

  33. Direct and swift test for aluminium in regenerated aluminium ingot

    再生铝锭中铝的直接快速测定

  34. In allusion to the problems of crack, air hole and etc which happened in the production process of soldering

    针对铸铁零件在制造及使用过程中常出现的裂纹、气孔等问题,研究探讨了修复铸铁零件的方法&热焊法、冷焊法、加热减应焊法。

  35. Technology of Graining and Coloring of Aluminium and Aluminium Alloy

    铝及铝合金仿木纹着色技术

  36. J-STD-004 Standard and Selection & Use of Soldering Flux

    J-STD-004标准与助焊剂的选用

  37. Hands-on experience PCBA soldering and debug as first plus.

    具备实际操作PCBA手工焊接和电路诊断经验,为首要优先条件。

  38. Conventional wave soldering exist leak welding , solder joint icicles, PCB deformation, etc.

    传统的波峰焊存在漏焊、焊点拉尖、PCB变形等问题,回流焊存在温度过高,且两者成本都很高。

  39. Use plenty of soldering flux to ensure a perfect connection.

    使用大量的焊接通量,以确保完美的连接。

  40. Automatic Management System of Solder Joint Reliability in Reflow Soldering

    再流焊焊点可靠性自动管理系统