puller 是什么意思

puller的中文意思是: 拉拔器

puller例句大全

  1. insert internal puller internal puller into the differential cover.

    将内部拉具内部拉具插入差速器盖。

  2. Technology of manufacturing linear motor type puller

    直线电动机式牵引机制造技术

  3. Pull valve using relay puller if necessary.

    如有必要,使用继电器拉具拉动阀门。

  4. remove bearing cover using special tool puller.

    使用专用工具拉具拆下轴承盖。

  5. Influence of worn puller drum on steel rope and bearings

    牵引卷筒磨损对钢丝绳和轴承的影响

  6. remove spacer ring and timing gear with a conventional puller.

    用常规拉具拆卸隔环和正时齿轮。

  7. remove intake socket with the internal puller.

    用内部拉具拆下进水管座。

  8. Secondly there is a relative angle between a traditional puller and workpieces so the puller can't work

    其次,传统的拔卸器和轴承工件之间有一个相对角度,因此不能垂直用力,工作范围受限。

  9. In view of taking down the hinge pin of hydraulic support, developed the pneumatic puller on the basis

    针对液压支架铰接销拆卸难的问题,在普通锤式助拔器的基础上,利用风动扳手和螺旋副传动,研制了风动助拔器。

  10. Pull off Cardan flange with three-arm puller.

    使用三臂拉具拉出万向节法兰。

  11. Destroy the plastic sleeve before fitting the puller.

    伸入拉具之前先破坏塑料套管。

  12. A Nail puller is fixedly connected on the base .

    在底座上固定连接有起钉器。

  13. To do this, insert internal puller into the opening and tighten.

    为此,将内部拉具插入到开口中并拧紧。

  14. The utility model discloses a Nail puller, which provides a nail puller of simple structure, convenient

    本实用新型公开了一种拔钉器,目的是提供一种在拔钉的同时又可清除残钉,结构简单,方便携带和使用的拔钉书钉器。

  15. To do this, the special tool relay puller can be used.

    为此,可以使用专用工具继电器拉具。

  16. Hold the puller tightly with the other hand while doing so.

    进行上述操作时请用另一只手紧紧握住拉具。

  17. The special design of cloth puller, moved by twin puller will prevent slipping and crinkle, and make

    本机种可加装精精心设计的拉布轮,双轮上下全带动,防滑防皱。缝制出平滑完整的衣服、雨衣、车罩马靴。

  18. remove the special gear puller and adapter tools from timing gear cover.

    从正时齿轮罩上拆卸专用齿轮拉拔器及接头工具。

  19. Double puller, skip stitch device and automatic cutter result in a uniform quality finish.

    双拉,跳针装置和自动在一个统一的质量完成刀具的结果。

  20. It is introduced a puller applied to purification of rare earth ( RE ) material, according to the float

    介绍了一种用于稀土金属提纯的单晶炉,根据区熔法提纯单晶的特殊工艺要求,分析了其主要结构及特点。

  21. Insert wire puller with the flexible end on the right side into the rubber sleeve.

    将拉线器(其右侧为挠性端)插入橡胶套。

  22. In a small alley, a dog, unaccustomed to a long-gowned puller, nipped at his heels.

    进了小胡同,一条狗大概看穿长衣拉车的不甚顺眼,跟着他咬。

  23. Fixed mould puller pins, stop drag-bars and nylon shutters were used to open the mould sequentially.

    并用前模拉料销、限位拉杆和尼龙开闭器控制开模运动顺序,实现了浇注凝料的自动脱模。

  24. Use a universal puller to separate the ball stud from the frame rail bracket.

    用万能拉出器将圆头螺栓从车架横梁支架上拆下。

  25. Lockstitch cylinder bed with a synchronous puller behind the needle, which continuously operates up and

    锁式线迹悬臂,机针背后同步连续输送上、下拖辘。

  26. Amir found a job as a rickshaw puller after which he went onto work in a maintenance yard.

    阿米尔找到了一份人力车夫的工作,之后他在一家维修厂工作。

  27. Puller, a tool used to unload the bearings set in the bearing bore, can unload bearings and workpieces

    拔卸器,这是一种对设置于机具内孔处的轴承进行取卸用的工具,可卸下镶在轴上的轴承或工件。

  28. Xiangzi was a modest rickshaw puller in the capital , but one who dreamed of a rickshaw to call his own

    祥子是京城一个谦虚的车夫,但他梦想有一辆自己的车。

  29. Oil-powered hydraulic truck jack Hydraulic pump is the power unit of the hydraulic puller ( hydraulic

    油压泵是油压拉出器(油压机、油压弯管机、油压千斤顶)的动力装置。

  30. A special injection mould with multi-core puller to fit the needs of the injection moulding piece-plastic

    风轮塑件上有12个周向均布的圆弧形叶片,注塑生产时需要多型芯圆弧抽芯,常规的注塑模结构不能满足生产要求,为此设计了一种特殊的风轮注塑模具。

  31. I'm not going to let a stinking rickshaw puller have it all his own way!"

    “我怎办?不是说过了,有他没我,有我没他!我不能都便宜了个臭拉车的!”

  32. addition, each groove shape opening of the utility model is a pressing part, so the structure of the nail puller

    另外,本实用新型的起钉器每一个槽形口为一个冲压件,故结构较为简单,成本低。

  33. weekends is going to be more price sensitive, and airlines might realize that and lower their fares, Puller

    普勒告诉电台的记者说:喜欢在周末购买机票的人对价格更加敏感,航空公司也许意识到了这一点,特意调低了票价。

  34. We use homemade bolt puller to preload the clamp bolt, which more accurately controls the preload of

    采用自制螺栓拉拔器对索夹螺栓进行预紧,更加精确地控制了索夹螺栓的预紧力,确保索夹对主缆的握紧效果。

  35. opener, such as letter opener with mirror, letter opener with ruler and clip, letter opener with nail puller

    OEM的分化和各种开信刀,多功能开信,如开信刀镜,开信统治者和剪辑,开信刀钉拉拔,你的标志,是值得欢迎的。

  36. While the structure of hydraulic puller makes it possible to work vertically and the distance among various

    而液压式拔卸器的结构决定了它可以垂直用力,软力臂相互间的距离也可以进行调节,扩大了拔卸器原有的工作范围。

puller英语释义
出自:WordNet

1
someone who pulls or tugs or drags in an effort to move something

近义词: tugger,dragger

2
someone who applies force so as to cause motion toward herself or himself