thread of life 是什么意思

thread of life的中文意思是: 生命之线

thread of life例句大全

  1. This thread of life, of course , is deoxyribonucleic acid.

    这一生命细丝当然就是脱氧核糖核酸。

  2. My personal life is hanging by a thread.

    我的个人生活岌岌可危。

  3. Clotho weaves thread of life for every mortal, god and titan.

    克洛索为每个凡人、灵和泰坦纺织生命线。

  4. I hope that throughout my life I'll sort of have the thread of my life and the thread of Apple weave

    我希望在我一生当中,我能在某种程度上把我的人生和苹果像毛毯一样编织穿插在一起。

  5. My personal life is hanging by a thread, that's all.

    仅此而已,我的私生活一帆风顺。

  6. My personal life is hanging by a thread, that's all.

    我的私人生活受到威胁,就是这样。

  7. In the midst of this labyrinth let us live a thread of life.

    在我们生命迷宫的中央,让我们牢牢抓住那条生命的线。

  8. Study on the roll life of ribbed steel wire cold rolling mill thread milling

    螺纹钢丝冷轧机轧辊寿命研究

  9. "It sometimes feels like life is hanging by a thread,"said Liu.

    刘翔说:“有时候感觉生活就像悬着一根线。

  10. For some time after he dangerous operation , Keren's life hang by a thread.

    在作了有危险的手术后的一段时间,凯伦的生命处于垂危之中。

  11. The core bit includes shank and thread, which consists of male thread and female thread.

    有直柄钻头和螺纹柄钻头之分,螺纹柄分为内螺纹和外螺纹。

  12. For instance, awl thread, ladder-shaped thread and triangle thread etc.

    例如,锥螺纹、梯形螺纹、三角螺纹等。

  13. Products included: Rayon Embroidery Thread, Polyester Embroidery Thread, Sewing Thread and Metallic Yarn

    产品包括:人造丝绣花线、涤沦丝绣花线,缝纫线及金银线。

  14. API drill pipe thread API tubing thread

    美国石油学会标准钻杆螺纹美国石油学会油管螺纹

  15. But from this experience , I understand that love is just a thread in the quilt of our life.

    但是从那一刻起,我明白了,爱情就像是生活中被子里的一根线。

  16. The root of the external thread or the crest of the inner thread.

    大径指过外螺纹牙顶或内螺纹牙底的圆柱面直径。

  17. The equations for thread taper, thread pitch, thread angle and height of thread can be derived on the

    该方法可测量螺纹的锥度、螺距、螺纹夹角和螺纹高度,测量精度可以满足工业测量要求。

  18. Chisel cutting operation of cut, cut cut, cut file , attack thread, the thread sets .

    切削性操作有錾削、锯削、锉削、攻螺纹、套螺纹。

  19. The research result states that the contacting stress, thread torque and thread joggle geometry restriction

    研究结果表明:接触应力、上扣扭矩、螺纹啮合时的几何约束,是齿面粘扣的力学要点。

  20. Any process, thread, or daemon that is running as a part of your application must have life cycle capability

    任何作为您应用程序的一部分运行的进程、线程或守护进程必须有其自己的生命周期功能。

  21. A single arrow indicates a thread contention: One thread is waiting for another thread to release a lock

    一支单独的箭头指出一个线程竞争:一个线程正在等候另一个线程释放一个锁。

  22. Finit element analysis on stress of slip screw thread fit screw thread tooth base

    滑动螺旋副螺纹牙根应力有限元分析

  23. Of course the spawned thread can pass a message back to its parent thread.

    当然,这个派生的线程也可以将消息传递回其母线程。

  24. Analysis on the Failure Form of D-grade Roller for External Thread of Sucker Rod and the Methods for

    D级抽油杆螺纹滚丝轮的失效分析与延寿对策

  25. That the thread endures high alternate stress is the first cause of failure of thread joint.

    螺纹部位承受高的交变应力,是导致螺纹联接螺纹失效的主要原因。

  26. Three more birthdays of little Lucie had been woven by the golden thread into the peaceful tissue of

    小露西的三个生日的金丝又织进了她家庭生活的平静的经纬里。

  27. The polling thread waits for the signal from the first thread.

    轮询线程会一直等待第一个线程给它发送一个信号。

  28. Under air-conditioning condition, the thread pitch of the inner screw thread tubes was varied.

    另一种是将空调工况下的换热器的等螺距内螺纹管设计成变螺距内螺纹管,以增加管内气流的扰动,提高传热系数。

  29. That RT thread would immediately preempt the regular Java thread if there were insufficient available

    如果没有足够的可用处理器来同时运行RT线程和普通Java线程,则这个RT线程会立即抢占普通Java线程。

  30. According to connection method classification ( 1 ) threaded connection valves: valve with internal thread

    按连接方法分类(1)螺纹连接阀门:阀体带有内螺纹或外螺纹,与管道螺纹连接。

  31. these exceptions are handled by using the default behavior, printing out a stack dump, and ending the life

    通常是使用默认行为、打印堆栈溢出和结束线程的生命来处理这些异常。

  32. This blocks the main thread but executes the code on another thread.

    这阻塞了主线程但是在另一个线程上执行代码。

  33. Study on the Thread Profile of Self-tapping Screw and the Design of Round Thread Rolling Die

    自攻螺钉用螺纹牙型及圆滚模设计探讨

  34. The kernel thread and the application thread will handshake with each other.

    内核线程和应用程序线程需要相互进行握手。

  35. NC Turning of Screw Thread part s

    螺纹轴类零件的数控车削加工问题探讨

  36. This thread supports fine-grain parallelism, actually, it is a"stateless"thread.

    该线程支持细粒度并行,实际上是一种无状态的线程。

  37. Similarly, if a thread is blocked in an I / O operation on a channel , another thread can interrupt that

    类似地,如果一个线程在某条通道的I/O操作上阻塞时,那么另一个线程可以中断这个阻塞线程。

  38. A machine stitch in which the top thread interlocks with the bobbin thread.

    上面的线与底线相连的一种缝纫机缝纫方法。

  39. Measurement of screw thread hole position

    螺纹孔系位置度的测量

  40. Numerical control of inside tapered thread

    尝试内锥螺纹的数控加工