water injection 是什么意思

water injection的中文意思是: 注水

water injection例句大全

  1. Water-injection system contain headwaters, water-injection station , water distributing station, injection

    注水系统包括水源、注水站、配水间、注水井口、注水井场及注水管道六部分。

  2. Water injection system for charge gas compressor is introduced in the article and comparison is made

    介绍了裂解气压缩机注水系统,对压缩机注油与注水进行了比较。

  3. hard Coal Mining Water Injection softening Method

    双阳煤矿硬煤开采注水软化方法

  4. The water from offshore oil field chiefly comes from injection water, edge water and bottom water.

    海上油田产出水主要来源于注入水、边水和底水。

  5. Influence of replacing wash oil injection with condensate water injection on cracking gas compressor

    注洗油改为注水对裂解气压缩机组的影响升压压缩机,增压压气机

  6. Coal Bed Water Injection Hole Drilling Construction Technology

    煤体注水钻孔施工技术

  7. Digital Simulation for Large scale Water Injection Systems

    大型注水系统的数字仿真

  8. This new method takes comprehensive consideration of water quality compatibility, water treatment, water

    该方法综合考虑了油田注入水水质的配伍性、水质处理工艺、注水井吸水能力、增注措施、油田配注要求以及注入水综合成本等各方面的要求;

  9. Real water injection rate in water injection well will change when system pressure fluctuates or formation

    注水井实际注水量随系统压力波动或地层吸水能力的变化而改变,这是针型阀或井下固定水嘴无法避免的缺陷。

  10. However, in water flooding water quality influences the water injection rate and the effect of water

    然而,注水过程中,水质的优劣将直接影响油田注水量以及开发效果。

  11. Study on the law of water seepage in water injection into coal seams

    煤层注水中的水渗流规律研究

  12. At the same time, serious corrosion and scale buildup of water injection system, leak of water pipeline

    同时也造成注水系统腐蚀、结垢严重,地面注水管网穿孔频繁,高压注水设备、计量装置故障增多。

  13. Modification of water injection pump for pressure up grading

    注水泵压力升级改造及其柱塞密封改进

  14. intelligent dual - flow regulating valve assembly for water injection

    油田注水井智能双流调节阀装置的研制

  15. Downhole temperature distribution in different injection and formation conditions ( for example injection

    模拟不同注入时间、不同关井时间、不同注入速度、不同注水温度、不同围岩、不同饱和度、不同孔隙度等多种注入条件和地质条件下并下温度分布的情况。

  16. Water delivery and injection line: cleanup scale and sediment.

    输水、注水管线:清除水垢、沉积物。

  17. fine filter for water injection in low-permeability oilfield

    低渗透油田注水用三级精细过滤器

  18. Confirming injection and production ratio of edge water reservoir depends on accurate water influx.

    边底水油藏注采比的确定,需要有准确的水侵量为依托。

  19. Determination Dissolved Oxygen in Water by Static Injection Chemiluminescence Spectrometry

    水体中溶解氧的静态注射化学发光法测定

  20. Oilfield Water Injection Remote Centralized Control System Based on DSP

    基于DSP的油田注水远程集中控制系统

  21. Measurement of ammonia nitrogen in water by flow injection analysis

    流动注射法(FIA)测定水中氨氮

  22. Control of very hard roof with water injection softening method

    用注水软化法控制特硬顶板

  23. Drilling and completion technologies as well as rational injection allocation are engineering factors

    钻井、完井技术以及合理配注是影响注水效果的工程原因。

  24. The evaluation way for water storage rate and water flooding index of water injection effect in ultra-low

    特低渗油田注水效果存水率和水驱指数评价法

  25. By analyzing the simulated results we can conclude that temperature logging can distinguish water entry

    并对模拟的结果进行分析,从中可以得出:短期热注、提高注水速率、选择合适的关井时间等可以提高温度测井对注入剖面的识别能力;

  26. Improvements of the lubricating Oil Filter in a Water Injection Pump

    注水泵润滑油过滤器的改进

  27. Study on Systematic Reliability of High Pressure Water Injection Pump Head

    高压注水泵泵头的系统可靠性研究

  28. applied Research on Noise Control of Pump Room of Water Injection

    注水泵房噪声控制设计应用研究

  29. Determination of DDVP in Water Samples with Flow Injection-Fluorometry Technique

    流动注射&荧光法测定水样中敌敌畏含量

  30. Optimizing the water injection control system during the polymerization of VCM

    VCM聚合过程中注水控制系统的优化

  31. Research of improving technology profile by water injection well temporary acidizing

    地下水水化学剖面图注水井暂堵酸化改善吸水剖面技术研究

  32. Correlation curve for the evaluation of the effectiveness of water injection

    评价油田注水效果的两种对比曲线

  33. Reason analysis and preventive measures of sanding in water injection well s

    注水井出砂原因分析及防治措施

  34. Design of Water Plugging during Grout Injection in Underwater Tunnel Construction

    水下隧道施工中的注浆堵水设计探讨

  35. This paper presents the injection parts molding process and injection mold structural characteristics

    介绍了冰箱接水盒注塑件的成型工艺特点及注塑模具的结构特点及工作过程。

  36. In order to improve the quality of water-injection, the PVC alloy hollow fiber UF membrane was used to

    为提高注水水质,采用PVC合金中空纤维超滤膜进行了油田清水注水处理的现场中试试验,对超滤膜的工艺运行、影响因素和处理效果进行研究。

  37. Because oil fields need the water injection well monitoring device, design a kind of flow rate automatic

    结合油田注水井监控装置的需要,设计了一种流量自动调节阀,用来配合注水井监控装置的使用。

  38. The principles of down-hole oil-water separation for injection-production technology for the same well

    根据井下油水分离同井注采技术原理,利用室内实验和现场试验分析了该技术对聚驱油田的适应性。

  39. The water - absorbing capacity of oil reservoir can be increased by the injection of indepth treated

    注入经深度处理的水,可提高油层吸水能力。

  40. Study on vibration of suction line on the reciprocating water injection pump

    往复式注水泵吸入管线振动试验研究