aluminium ingot 是什么意思

aluminium ingot的中文意思是: 铝锭

aluminium ingot例句大全

  1. Direct and swift test for aluminium in regenerated aluminium ingot

    再生铝锭中铝的直接快速测定

  2. Purification of Aluminium Ingot by Segregation method

    偏析法净化原铝的研究

  3. How to Reduce the surface Corrugation of Aluminium Ingot

    如何减少铝锭表面波纹

  4. causes of Shaft Wrinkle defect of Aluminium Flat Ingot

    铝合金扁锭宽面竖状皱褶缺陷的成因

  5. Experience for horizontal Continuous casting 6063 Aluminium Alloy Ingot

    水平连续铸造6063铝合金铸锭的实践

  6. Reformation of reversing device of aluminium alloy ingot scalper

    铝合金铸锭铣床翻锭机的改造

  7. Application of PLC on Continuous Foundry Set for Aluminium Ingot

    PLC在铝锭连续铸造机组上的应用

  8. Simultaneous Determination of 8 Impurity elements in Aluminium Ingot by ICP-AES Analysis to the Bubble

    ICP-AES测定铝锭中八种杂质元素浅析铝合金铸锭均匀化退火表面起泡原因

  9. The Working Station of the stack - manipulator to Aluminium - ingot

    铝锭堆垛机械手工作站

  10. Research about wrinkle defects on surface of aluminium alloy flat ingot

    铝合金扁铸锭表面竖状皱褶缺陷的研究

  11. Analysis and Improving on the Ripple in surface of Aluminium Ingot

    铝锭表面波纹的成因和改善

  12. Application of Pulverized Coal Fiat-flame Burner in Aluminium Ingot heating Furnace

    煤粉平焰烧咀在铝棒加热炉上的应用

  13. Determing the process factors of auto control cast aluminium alloy flat ingot

    铝合金扁铸锭自动控制铸造工艺参数设定

  14. Preventing Shining Crystal Grain of 6063 Aluminium Alloy Ingot during Casting Course

    防止6063铝合金圆铸锭光亮晶粒的措施

  15. Analysis to the Bubble Formed on surface of Aluminium Ingot During Homogenization Annealing

    浅析铝合金铸锭均匀化退火表面起泡原因

  16. controlling the Contents of Iron, Silicon, Copper for High Purity Aluminium Casting Ingot

    高纯铝铸锭的铁、硅、铜含量控制

  17. Analysis of Water Cooling Interface Heat Transfer in Continuous Casting of Aluminium Ingot

    连续铸造铝锭水冷边界换热条件的分析

  18. Reason to produce cutting crack and preventive measure of 6082 aluminium alloy flat ingot

    6082铝合金扁铸锭锯切裂纹产生的原因及预防

  19. Improvement on the de-moulding mechanism for 20 kg aluminium ingot continuously casting machines

    20kg铝锭连续铸造机组脱模机构的改进

  20. The new preparation method of Al-Ti-C grain refiner was studied with aluminium ingot, potassium hexafluorotitanate

    提出了利用铝锭、氟钛酸钾、铝粉、六氯乙烷和碳粉制备铝钛碳晶粒细化剂的新方法。

  21. Determination of Si and Fe in Exported Aluminium Ingot with Samples Dissolved by Alkali One Time

    碱溶法一次溶样测定出口铝锭中硅和铁

  22. integer linear programming model is established for the integrated batching and scheduling problem of the aluminium

    针对铝锭生产集成批调度问题,建立了一个混合整数线性规划模型。

  23. The composition design, melting process theory and defect control on cast ingot of Aluminium standard

    阐述了铝块状光谱标样的成分设计、标样熔炼工艺理论及铝标样铸锭缺陷的控制。

  24. Aluminum Corporation of China Limited Qinghai Branch is an electrolysis aluminium smelter with professional

    中国铝业股份有限公司青海分公司是中国铝业股份有限公司唯一的专业化电解铝厂,主要生产重熔用铝锭、阳极炭块。

  25. Al melting is high energy consumption industry, energy cost is a fixed ratio in costs, Alumina, Aluminium

    铝冶炼企业是高能耗产业,能源费用在成本中占有一定比例。

  26. Aimed to the lower-efficiency and bad-stability of aluminium ingot stack er used in electrolytic aluminum

    针对目前我国电解铝厂使用的国产铝锭堆剁机的效率较低、稳定性较差等问题,通过对其结构、工作原理和运动特点的分析与研究,设计了一种新型高效全自动铝锭堆垛机。

  27. Computer Simulation of Temperature Fields of Ingot mould in the Casting Ingot

    钢锭模在铸锭过程中温度场的计算机数值模拟

  28. Composition and property of tin ingot imported and domestic tin ingot are compared.

    分析比较了进口锡与国产锡的成分和性能。

  29. effect of ingot type and rolling schedules on bloom yield from rimmed steel ingot

    锭型及轧制规程对提高沸腾钢锭初轧成坯率作用的研究

  30. To obtain the high-quality forged steel ingot, it must control the ingot solidification process.

    要获得锻造所需的优质钢锭,就必须控制钢锭的凝固过程。

  31. By studying the relationship between bubble formed on the aluminium ingot surface and production condition

    本文通过考察铸锭均匀化退火起泡与生产条件、均匀化退火和环境气氛等的关系,初步分析了铸锭均火起泡的实质,形成规律、机理等。

  32. The Comparative Advantages of Ingot Casting production During the Special steel s and Large Steel Ingot

    模铸在大钢锭及特殊钢生产方面的比较优势

  33. Overhead ingot turning and weighing machine

    架空式钢锭回转称量机

  34. Granular protective slag for ingot casting

    模铸用颗粒状保护渣

  35. A Math physical Model of Thermal Elastic plastic Stress Simulation of Ingot mould in the Casting Ingot

    钢锭模在铸锭过程中热弹塑性应力数值模拟的数理模型

  36. Solidification and segregation of steel ingot

    钢锭的凝固与偏析

  37. Making Zinc Powder from Zinc ingot with Reverberatory Furnance Process Study on Several Problem of Zinc

    锌锭反射炉法生产锌粉实践锌锭模制造问题探讨与研究

  38. Technical Modification of Ingot mould Foundry

    钢锭模铸造车间的技术改造

  39. The ingot repairing welding technology being one of important measures improving ingot mould service

    指出钢锭馍焊补技术是提高钢锭模使用寿命的重要措施之一。

  40. Aluminium and aluminium alloy wires for welding purpose

    GB/T3197-1982焊条用铝及铝合金线材