surface manuring 是什么意思

surface manuring的中文意思是: 表面制造

surface manuring例句大全

  1. effect of Topdressing Time and ratio Between Basic Manuring and after Manuring of Nitrogenous Fertilizers

    氮肥基追比和追肥时期对小麦产量的影响

  2. Effect of increasing production of rice by manuring green duckweed

    绿萍对水稻的增产效果

  3. Manuring seedlings are badly in lignification and easy to top drying ;

    施肥苗造林木质化不好,易干尖;

  4. Study on Manuring Techniques of High Yielding Mulberry Field in Irrigation Region of Ningxia

    宁夏灌区丰产桑园施肥技术研究

  5. Nitrogen manuring is essential to get a good yield of cut herbage.

    为了获得刈割牧草良好的产量,使用氮肥是极为重要的。

  6. Effects of Interplanting with Zero Tillage and Wheat Straw Manuring on rice growth and grain Quality

    免耕套种与秸秆还田对水稻生长和稻米品质的影响

  7. But the effects of straw manuring on growth and yield was obviously greater in early rice than in late

    但秸秆还田对早稻生长发育的影响明显大于对晚稻生长发育的影响。

  8. Relationship Between Leaf Yield and Branch Number, Length of Mulberry Tree and Manuring Quantity in an

    单位面积桑园条数条长和施肥量与产叶量关系

  9. For a time weeding and manuring were neglected.

    他劈柴,生火,在小菜园里松土并锄草。有一段时间,锄草和追肥有所忽略。

  10. A Preliminary Study on the Influence of Mixed Manuring and Fertilization on the Fertility of Downland

    配方施肥对岗黄土肥力和作物产量作用的初探

  11. Effects of interplanting with zero tillage and wheat straw manuring ( ZIS ) on rice growth and grain

    在稻麦两熟条件下,研究了麦田免耕套种水稻与秸秆还田对水稻生长和稻米品质的影响。

  12. The plane, the surface, the spherical surface, the heterogeneous surface, 360 degree entire circumference

    平面、曲面、球面、异型面、360度全圆周面均可加工。

  13. Surface porosity, surface composition and surface tension are all relevant factors .

    表面孔率、面组分及表面张力也都是相关因素。

  14. Surface Tessellation for Surface Quality Analysis

    面向曲面品质分析的曲面离散技术

  15. The bionic design of surface layer can be classified as surface colour design, surface pattern design

    表面层的仿生设计可分为表面色彩设计、表面图案设计、表面材料设计与表面结构设计。

  16. Surface Forms: Coarse sand anti-slip surface, uneven anti-slip surface and orange peel-like anti-slip

    表面形态:粗砂防滑型、凹凸面防滑型、桔皮防滑型。

  17. The surface modification methods for preventing silver products from tarnishing were summarized , such

    概述了防止银产品变色的表面改性方法:表面钝化、表面镀膜和表面涂膜,并着重介绍了表面涂膜法。

  18. Experiment on Green Manure Manuring under the Young Growths of Prunus armeniaca in the Arid Valleys of

    岷江上游干旱河谷山杏幼林地绿肥种植研究马尾松人工中龄林施肥肥效与增益持续性研究

  19. Evaluation Method for Kill Effect of Intercepting Air-to-Surface and Surface-to-Surface Tactics missile

    地空导弹拦截战术弹道导弹杀伤效果评定方法

  20. Wettability depends on one specific property of the surface: Surface energy, often referred to as surface

    润湿性依赖于某一特定财产的表面:表面能量,通常称为表面张力。

  21. Related to contact surface model, contact surface element and constitutive relationship of contact surface

    另外文中还对接触面模型从接触面单元和接触面本构关系两方面进行了介绍和评述。

  22. research of a Special Helical Surface and Its Conjugate Surface

    一种特殊螺旋曲面及其共轭曲面的研究

  23. Effectiveness Evaluation of Surface-to-surface missile Battle Safeguard system

    地地导弹作战保障系统效能评估

  24. Floc properties may be described by properties as floc strength, specific surface area, surface potential

    絮凝物可以通过絮凝物强度,具体表面,表面潜力和表面能量来描述。

  25. Surface quality analysis is the indispensable step in car body development process.

    曲面品质分析是车身开发过程中必不可少的一步,准确的曲面品质分析需要高质量的曲面离散网格,提出了一种新的面向曲面品质分析的裁剪参数曲面离散技术。

  26. Simulation results show that the roughness of surface become smaller after the interaction between rigid

    模拟结果表明在刚性光滑平面与理想粗糙表面相互作用之后,粗糙度变小,表面结构也发生较大变化。

  27. The surface reflectance is an important parameter controlling surface energy balance .

    地表反射率是控制地表能量平衡的一个重要参数。

  28. Micro - Yield Stress in Surface Layer and Its Deformation Architecture Surface

    表面微观屈服应力与表面变形研究

  29. These surfaces have a weak surface layer, without surface air bubbles.

    此类表面的表面层弱,无表面气泡。

  30. Construction of Long-range Surface Observation system for Surface Ship Formation

    水面舰艇编队远程对海观察体系构建

  31. These problems include reverse calculation fitting of straight grain surface between curved surface and

    具有脊线曲面的反算拟合;燃面拟合的边界条件及曲面加密网格的求解等特殊问题。

  32. According to the curvature of surface, it confirms surface processing region and utilizes the limiting

    根据曲面曲率确定曲面加工区域并指出应用限制线和限制面加工方法来实现。

  33. Mechanical surface enhancement ( MSE ) was one of the surface modification technologies to induce the

    表面机械强化处理作为表面改性技术的一种,能够改变材料表面的微观组织结构和残余应力场分布。

  34. The matching methods between measuring surface and design surface were studied for the profile error

    研究了光学自由曲面轮廓误差评定中被测曲面和设计曲面的匹配方法。

  35. Acoustic Surface Wave Detection of Defects in Surface of Structural Ceramics

    结构陶瓷表面缺陷的表面波检测

  36. aboveground nuclear testing ; surface instruments for detecting oil deposits ; surface transportation

    地面核试验;探测油类沉淀物的地表器械;地上运输。

  37. The friction heat formed in the roughness surface influences surface morphology ;

    由粗糙表面产生的摩擦热作用在粗糙表面进而影响粗糙表面的形貌;

  38. Appear on the surface, come to the surface on the ground.

    在地面上出现,在地层的表面出现。

  39. Polarized light scattering of particle above a surface and surface microroughness

    表面上方微粒及微粗糙度偏振光散射特性

  40. research on operational effectiveness of surface-to-surface anti-radiation missile

    地地反辐射导弹作战效能探讨